Foshan Top One Power Technology Co.,Ltd.
We not only produce inverter, we design inverter!
Add to Cart
single phase inverter off gird dc to ac pure sinewave inverter 48v 2000w 220v with charger
Model : GI-20248
Function:
Adjustable charging current: End users can adjust AC charging current according to their own needs.
Optional battery mode: Different working mode for different battery type, which makes our converter work under best situation.
Adjustable mains priority and converter priority mode:
Mains priority: When AC mains and DC battery are connected at the same time, converter chooses AC mains for priority AC output.
| GI Series Low Frequency Pure Sine Wave Inverter (220V) | ||||||||
| Model | GI-102 | GI-152 | GI-202 | GI-302 | GI-402 | GI-502 | GI-602 | |
| Rated Power | 1KW | 1.5KW | 2KW | 3KW | 4KW | 5KW | 6KW | |
| Peak Power | 3KW | 4.5KW | 6KW | 9KW | 12KW | 15KW | 18KW | |
| Nominal battery voltage | 12/24VDC | 12/24/48VDC | 24VDC/48VDC | |||||
| Input | DC input range | 10.5-15VDC (12V) / 21-30VDC (24V) / 42-60VDC (48V) | ||||||
| AC Mains input range | 170-275VAC (220/230/240VAC)±4% | |||||||
| AC input frequency | 50Hz: 45-65Hz / 60Hz: 55-65Hz±0.5Hz (50Hz/60Hz automatic recognition) | |||||||
| Protection | Low battery alarm | ≤10.5VDC (12V) / ≤21VDC (24V) / ≤42VDC (48V) alarm | ||||||
| Low battery protection | ≤10VDC (12V) / ≤20VDC (24V) / ≤40VDC (48V) automatic shutdown | |||||||
| High battery alarm | ≥15VDC (12V) / ≥30VDC (24V) / ≥60VDC (48V) alarm | |||||||
| High battery protection | ≥17VDC (12V) / ≥34VDC (24V) / ≥68VDC (48V) automatic shutdown | |||||||
| Over load protection | 110%<loading<150%, shutdown after 60s alarm, loading>150%, shutdown after 20s alarm | |||||||
| High temperature | Built-in temperature real time sensor, ≥85℃ alarm, ≥90℃ automatic shutdown | |||||||
| Short circuit protection | Automatic shutdown | |||||||
| Output | Transfer efficiency | ≥92% | ||||||
| Output voltage | (DC battery mode) 220/230/240VAC±2% | |||||||
| Output frequency | (DC battery mode) 60/50Hz±1% | |||||||
| Output wave form | Pure sine wave | |||||||
| Output voltage | (AC mains mode) stable 220/230/240VAC±10% output (built-in AVR stablizer) | |||||||
| AVR output stablizer | AC mains<170VAC±5% swtich to DC battery mode, AC mains>180VAC ±5% return to AC mains mode; | |||||||
| AC mains>275VAC±5% swtich to DC battery mode, AC mains<255VAC ±5% return to AC mains mode; | ||||||||
| The above is for output 220V system reference, 230V/240V output just multiply by percentage | ||||||||
| Output frequency | (AC mains mode) automatic tracing from AC input | |||||||
| Other | Transfer time | ≤4ms | ||||||
| Display | LCD Display with function buttons | |||||||
| Cooling system | Intelligent cooling fan control system | |||||||
| ≤42℃ slow fan, ≥45℃ fast fan | ||||||||
| AC Charger | 7 battery types mode | Gel U.S.A. / Gel European / A.G.M.1 / A.G.M.2 / Sealed lead acid / Open lead acid / Calcium(open) / | ||||||
| Deep sulphation cycle 15.5 for 4 hrs | ||||||||
| AC charging Voltage | 13.6-14.2VDC(12V)/27.2-28.4VDC(24V)/54.4-56.8VDC(48V) | |||||||
| AC charging current | 0-35A: 5A / 10A / 20A / 25A / 30A / 35A, 6 stages adjustable option | |||||||
| 3 Stages charging | Boost charging, direct charging, float charging | |||||||
| AC over charge protection | Battery voltage ≧16VDC (12V) ≧32VDC (24V) ≧64VDC (48V), stop charging after 60s alarm | |||||||
| Working mode (Optional) | 01 | AC mains priority | ||||||
| Always use AC mains as priority input to provide AC output and automatically charge the battery, only | ||||||||
| stops charging when battery is fully charged, and only starts DC to AC converting untill AC mains is off | ||||||||
| 02 | Energy saving | |||||||
| Loading≤10% automatic shutdown, loading≥11%-100% automatic turn on | ||||||||
| 03 | DC battery priority | |||||||
| Always use DC battery as priority input to provide AC output, for 12V system, when battery≥13V, starts | ||||||||
| DC to AC converting; when battery≤10.5V during converting, switch to AC mains mode to provide AC | ||||||||
| output and automatically start charging the battery (for 24V/48V system, multiply by 2/4 accordingly) | ||||||||
| Comnunication | RS-232/USB/SNMP(additional option) | |||||||
| Environment | Temperature | -20~75℃ | ||||||
| Humidity | ＜95% | |||||||
| Appearance | Product size (mm) | 430*310*270mm | 600*270*200mm | |||||
| Packing size (mm) | 540*350*300mm | 720*310*270mm | ||||||
| Net Weight (kg) | 15kg | 17kg | 24.5kg | 29kg | 44kg | 48.1kg | 49.5kg | |
| Gross Weight (kg) | 16.5kg | 19kg | 27kg | 31kg | 46kg | 50.1kg | 52.2kg | |
| *Product specifications are subject to change without further notice | ||||||||
About us:
1.Professional--Over 13 years Professional Solar inverter & UPS Power System Producing Experience.
2.Powerful productivity-- We can produce high frequency inverter 30000 pcs/ month, low frequency inverter 3500 pcs/month.
3.Hi-tech-- Powerful R&D department can provide professional technical support.
4.Certification-- Applied with CE, FCC certification.
5.Warranty--One year warranty.
Our service:
OEM service: We offer Professional OEM service. We have a comprehensive R&D team, proficient in exterior design, packaging design, programming, wiring, structural optimization, etc. We are confident to satisfy you on both hardware and software.
After-sales team: We have a specialized after-sales team to help answer question for 24 hours. When problem arises while using or need to adapt to the local grid, our after-sale engineer will follow up the issue.
Project Team: We have a specialized project engineering team aiming at the on-grid and off-grid system. If necessary, we can send the engineering team to the local for inspection and design the suitable system as well as conduct optimization and maintenance.